August 10, 2024
Overview: Unlock the secrets to excel in the Physics exam with this guide to the CUET Physics Important Questions. This comprehensive article will also help you understand the exam pattern, syllabus, and key questions to focus on, ensuring you're well-prepared to ace the test.
There were 672,773 registrations for the physics paper in CUET 2024, placing it among the top 5 most registered subjects. Given the high number of applicants, a strong understanding of CUET Physics Important Questions is crucial and can make a huge difference in your study strategy.
Read on to gain insights that will boost your performance in the exam.
Understanding the exam pattern, including the marks allotted to each unit, allows you to prioritize your studying accordingly.
As per the CUET exam pattern, the physics exam has one Question Paper which will have 50 questions out of which 40 questions need to be attempted.
Criteria | Domain Test |
Mode | Online/Offline |
Medium | English/Language Chosen in Section I |
Duration | 60 minutes |
Type of Questions | Objective |
Number of Questions (to be attempted) | 40 questions to be attempted out of 50 |
Marking Scheme | Correct Answer: +5 |
Incorrect Answer: -1 | |
Unattempted Answer: 0 |
Go through the section-wise CUET exam analysis to set your target scores.
Include the following units in order to successfully attempt all the questions in Physics paper.
To learn more about the sub-topics of the above units, ensure you check the CUET Physics syllabus 2025.
Attend FREE Demo Class by SuperGrads
The marking scheme for CUET exam physics paper is as follows -
Section | Total Questions to be Attempted | Marks Allocated for Correct Answer | Marks Allocated for incorrect answer | Total Marks |
Domain Subjects | 40 out of 50 | +5 | -1 | 200 |
These sample questions have been picked from previous year's CUET paper.
1 - When a slab of insulating material 4mm thick is introduced between the plates of a parallel plate capacitor of seperation 4mm, it is found that the distance between the plates has to be increased by 3.2mm to restore the capacity to its orginal value. The dielectric constant of the material is _.
1) 2
2) 5
3) 3
4) 7
Answer - 2) 5
Check: CUET General Test Syllabus 2025
2 - Ferromagnetic material used in transformers must have _.
1) Low permeability and high hysteresis loss
2) High permeability and low hysteresis loss
3) High permeability and high hysteresis loss
4) Low permeability and low hysteresis loss
Answer - 4) Low permeability and low hysteresis loss
Attempt SuperGrads CUET Scholarship Test
3 - Lower half of a convex lens is made opaque. Which of the following statement describes the image of the object placed in front of the lens?
Choose the correct answer from the options given below.
1) (A) only
2) (B) only
3) (C) only
4) (D) only
Answer - C) Intensity of image gets reduced
Check: CUET Marking Scheme 2025
4 - Two slits are made 0.1mm apart and the screen is placed 2m away. The fringe separation when a light wavelength 500nm is used is _.
Fill in the blank with the correct answer from the options given below.
1) 1cm
2) 0.15cm
3) 1.5cm
4) 0.1cm
Answer - 1) 1cm
Crack CUET with 3 Month Preparation Strategy
5 - In a pair of adjacent coils, for a change of current in one of the coils from 0A to 10A in 0.25s, the magnetic flux in the adjacent coil changes by 15Wb. The mutual indutance of coils is _.
Fill in the blank with the correct answer from the options given below.
1) 120H
2) 12H
3) 1.5H
4) 0.75H
Answer - 3) 1.5H
Check: CUET Preparation Books 2025
6 - Silicon can be doped using one of the following elements as dopant:
To get n-type semiconductor, the dopants that can be used are _. Fill in the blank with the correct answer from the options given beloow.
1) (A) and (C) only
2) (B), and (C) only
3) (A), (B), (C), & (D)
4) (C), and (D) only
Answer - 1) (A) and (C) only
7 - A 50Hz AC current of crest value 1A flows through the primary of a transformer. If the mutual inductance between the primary and secondary be 0.5H, the crest voltage induced in the secondary is _.
Fill in the blank with the correct answer from the options given below.
1) 75V
2) 150V
3) 100V
4) 200V
Answer - 3) 100V
8 - Two slits are made 0.1mm apart and the screen is placed 2m away. The fringe seperation when a light of wavelength 500nm is used is _.
1) 1cm
2) 0.15cm
3) 1.5cm
4) 0.1cm
Answer - 1) 1cm
Check: CUET Cut Off for DU
9 - For an astronomical telescope having objective lens of focal length 10m and eyepiece length of focal length 10cm, telescope's the tube length and magnification respectively are _.
1) 20cm, 1
2) 1000cm, 1
3) 1010cm, 1
4) 1010cm, 100
Answer - 4) 1010cm, 100
Ace the exam with CUET Study Plan
10 - For a full wave rectifier, if the input frequency is 50Hz, the output frequency will be _. Fill in the blank with the correct answer from the options given below.
1) 50Hz
2) 100Hz
3) 25Hz
4) 0Hz
Answer - 2) 100Hz
To check the rest of the questions in CUET Physics 2024 paper, scroll up and watch the video attached in this blog.
Focusing on the most important questions helps streamline your preparation, ensuring you cover the critical areas that are likely to appear in the exam. This targeted approach saves time and boosts confidence, leading to better performance.
Ace your preparations with CUET Books
Frequently Asked Questions
What is the marking scheme for the CUET Physics exam?
How many questions are there in the CUET Physics exam?
How can I effectively prepare for the CUET Physics exam?
Why is it important to know the CUET Physics important questions?
Where can I find the CUET Physics syllabus?